"Mehta Metal Industries", founded in 1978 by Babulal Mehta, is one of India's oldest and most trusted suppliers of high-quality stainless steel products.
Duplex Steel 2205 / 1.4462 Round Bars combine high mechanical strength with good resistance to pitting, crevice corrosion and chloride-induced stress corrosion cracking.
Also known as UNS S32205 Stainless Steel, UNS S31803 and DIN 1.4462 Stainless Steel, this duplex grade is widely used in chemical processing, oil and gas, marine equipment and industrial engineering.
Mehta Metal Industries welcomes enquiries for Duplex 2205 Stainless Steel round bars in various sizes and finishes, subject to availability, specifications and order requirements.
| Specification | Details |
|---|---|
| Product Name | Duplex Stainless Steel 2205 Round Bar |
| Common Grade | Duplex 2205 / SAF 2205 |
| UNS Designations | S32205 / S31803 |
| EN Material Number | 1.4462 |
| EN Designation | X2CrNiMoN22-5-3 |
| Material Type | Duplex Austenitic-Ferritic Stainless Steel |
| Product Form | Round Bars |
| Applicable Standards | ASTM A276/A276M, ASTM A479/A479M, EN 10088-3, as applicable |
| Surface Finish | Hot-rolled, peeled, bright or ground, subject to availability |
| Supply Condition | As specified in the order |
| Documentation | MTC and inspection documents, as agreed |
| Standard / System | Grade or Designation |
|---|---|
| Commercial Grade | Duplex 2205 / SAF 2205 |
| UNS | S32205 |
| Related UNS Grade | S31803 |
| EN / Werkstoff Number | 1.4462 |
| EN Designation | X2CrNiMoN22-5-3 |
| AFNOR | Z2.CND22.05.03 |
| Swedish Number | 2377 |
| Element | Symbol | Composition (% by weight) |
|---|---|---|
| Carbon | C | 0.030 max |
| Manganese | Mn | 2.00 max |
| Silicon | Si | 1.00 max |
| Phosphorus | P | 0.030 max |
| Sulfur | S | 0.020 max |
| Chromium | Cr | 21.00–23.00 |
| Molybdenum | Mo | 2.50–3.50 |
| Nickel | Ni | 4.50–6.50 |
| Nitrogen | N | 0.08–0.20 |
| Iron | Fe | Balance |
| Property | Reference Value |
|---|---|
| Density | Approximately 7.8 g/cm³ |
| Yield Strength (0.2% Proof) | Typically ≥450 MPa for applicable bar specifications |
| Tensile Strength | Typically ≥650 MPa; requirements vary by standard |
| Elongation | Commonly ≥25% for applicable bar specifications |
| Melting Range | Approximately 1,350–1,450°C |
Mehta Metal Industries welcomes enquiries from buyers seeking a Duplex Steel 2205 / 1.4462 Round Bars Supplier for industrial and engineering requirements. Share the required grade, diameter, length, quantity, finish and applicable standard so the material specification can be reviewed before order confirmation.
When sourcing Duplex 2205 Stainless Steel, buyers should verify the UNS designation, chemical composition, mechanical properties, dimensional tolerances and traceability requirements. Material Test Certificates and inspection documents can be arranged as agreed for the order.
Mehta Metal Industries accepts international enquiries for Duplex Steel 2205 / 1.4462 Round Bars and can review export requirements based on destination, quantity and material specifications.
Export packaging, material identification, inspection documentation and shipping paperwork can be arranged as agreed at the quotation stage. Availability, delivery schedules and destination-specific requirements must be confirmed for each order.
Duplex 2205 round bars are used where a combination of mechanical strength and corrosion resistance is required, including:
Mehta Metal Industries focuses on specification-based material supply, grade identification and order documentation. Material, dimensional, finish and inspection requirements should be agreed before dispatch.
For Duplex Steel 2205 / 1.4462 Round Bars, send Mehta Metal Industries your required diameter, length, quantity, finish, UNS grade, applicable standard and delivery destination. Our team can review the requirements and confirm available supply options, documentation and export packaging according to the order.
